Cleats Page 2

Cleat Type	Height mm	Base Width mm	Weight kg/m	Min Pully Dia. mm	Production Length/m
Type 'C'	35	55	0.50	100	3/5
	55	75	1.50	125	3/5
	75	80	2.00	150	3/5
	90	110	2.30	250	3/5
	110	110	2.50	315	3/5
Type 'TC'	75	80	1.80	150	3/5
	90	110	2.50	250	3/5
	110	110	2.80	315	3/5
	140	160	6.60	400	2.5
	180	160	8.30	500	2.5
	230	175	10.46	630	2.5
Type 'MBTC'	110	160	7.90	315	3
	140	160	9.25	400	3
	180	160	11.50	500	3
	230	160	13.50	630	3
	250	160	14.60	360	3
	280	160	17.65	800	3
	360	160	19.25	1000	3
Type 'TC-XS'	230	225	17.95	630	2.5
	250	225	18.90	630	2.5
	280	225	22.50	800	2.5
	360	225	26.00	1000	2.5
Type 'Tk'	35	110	1.65	100	3/5
	40	110	1.80	100	3/5
Type 'T'	20	40	0.28	75	3/5
	25	40	0.30	75	3/5
	35	55	0.55	100	3/5
	40	70	0.60	125	3/5
	55	80	1.45	125	3/5
	75	80	1.80	150	3/5
	90	110	2.50	250	3/5
	110	110	2.80	315	3/5
	140	160	6.60	400	2.5
	180	160	8.30	500	2.5
	230	175	10.46	630	2.5
Type 'MBT'	110	160	7.90	315	3
	140	160	9.25	400	3
	180	160	11.50	500	3
	230	160	13.50	630	3
	250	160	14.60	630	3
	280	160	17.65	800	3
	360	160	19.25	1000	3
Type 'T-XS'	230	210	17.85	630	2.5
	250	220	18.60	630	2.5
	280	230	19.50	800	2.5
	360	230	22.50	1000	2.5

The above are standard heights, non-standard are available, please enquire.

Ancillary Equipment for S-WallTM Cleat Profiles.

Screw Reinforcement sets are available in a selection of sizes to suit specific Cleat designs as follows:

Type 1 Cleat height 75mm
Type 2 Cleat heights 90mm to 110mm
Type 3 Cleat height 110mm
Type 4 Cleat heights 140mm to 180mm
Type 5 Cleat heights 180mm to 230mm
In addition Side Blinkers to prevent side seepage of fine material are available, see Cleats Page 1.